I Found a Fix

Where Answers are Found!

Welcome to I FoundAFix.com - Where real answers are found! Our aim is to provide proven solutions to real problems. This website is a resource for tried and tested answers for everyday or obscure problems.

Archive for the ‘Windows 7’ Category

Sep
18

Bootmgr is compressed press ctrl+alt+del to restart

Posted under Vista, Windows 7

The other day I Found A Fix for a recent problem I was having. The issue is described as follows….

Windows would not boot beyond the BIOS. I received the following message ” Bootmgr is compressed Press CTRL + ALT + DEL to restart”.

To resolve and repair please do the following;

1. Boot from a Windows 7 (or VISTA) dvd.

2. Choose to repair and select by command prompt.

3. Type the following;

– C: and hit return (to make sure you are on the C: partition)

– Type bootrec /fixboot

– Type EXIT and reboot.

I hope you too have found a fix!

 

 

 

Jun
09

How to change the port address for using Remote Desktop Connection (RDP)

Posted under Networking, Routers, Servers, Vista, Windows 7, XP

The other day I Found A Fix for a recent problem I was having. The issue is described as follows;

I needed to be able to access more than one pc in the office network remotely using Remote Desktop Connection. Since RDP is set to use port 3389 I had to make several changes.

1. Change the default port number on the second (listening) computer. To do this;

– Start Registry Editor. [Start, Run, Regedit]
– Locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\PortNumber
– On the Edit menu, click on Modify, and then click Decimal.
– Type the new port number, exampleand then click OK.
– Quit Registry Editor and restart the computer.

2. Modify the router to port forward this new port number to the specified IP address of the specific machine you are trying to connect to.

Note: You should ensure that both router firewall and software firewall allow access via this port.

 3. Make sure you specifiy the new address:port when connecting over RDP.

remote-desktop-connection

I hope you too have Found A Fix!